DELTA HMI SYSTEM MENU DOWNLOAD
Project, you will not be able to download or upload the new settings. If the connection between the HMI and the computer is not established before the start of the There is an automatic detection mode (Auto) that automatically detects the connection mode. If USB permission is restricted, set to mode 2 (CDC Mode).ģ. For Windows 7, 8 or 10, the upload / download mode must be set to 1 (Disk Mode).Ģ. In DOPSoft 4.0, go to Options> Configuration> Others> USB Download.ġ.
DELTA HMI SYSTEM MENU PC
In this case, it is recommended to use a virtual machine or a PC with Windows XP SP2.
![delta hmi system menu delta hmi system menu](https://5.imimg.com/data5/RH/GD/MY-2153300/jhk-500x500.jpg)
Models DOP-B05S100, B05S101, B07S201 and B07S211 do not have the CDC (2) communication option, therefore, they are not compatible with Windows 10. After configuration, press the upper right corner to return to the HMI project screen. > USBCommMode and set the mode to 0 or 1 or 2.ģ. When entering the HMI system menu, press the screen to enter System Setting> Misc. After the beep, quickly press the upper left corner of the HMI.Ģ. For DOP-B models that do not have a system button on the rear, you must, with the HMI turned on, press on any corner of the screen for a few seconds until you hear the beep. When the button is pressed, the bell will respond with a beep as a notification. Press the system menu button on the back of the HMI for 2 to 3 seconds. In this case, the user has to configure the system by pressing the system menu from the back of the HMI. If the connection between the HMI and the computer is not established before the project starts, it will not be possible to download or upload the new settings. Note: For Windows 10, CDC mode is the most recommended.
![delta hmi system menu delta hmi system menu](https://i.ytimg.com/vi/k15vuGqweb0/maxresdefault.jpg)
If USB permission is restricted, set to mode 2 (CDC Mode).Ĥ.
![delta hmi system menu delta hmi system menu](https://deltautomation.files.wordpress.com/2015/03/picture-4.jpg)
For Windows 7, 8 or 10, the upload / download mode must be set to 1 (Disk Mode).ģ. For Windows XP, the upload / download mode must be set to 0 (Normal Mode).Ģ. In DOPSoft 2.0, go to Options> Configuration> Others> USB Download.ġ. To access the PLC via the HMI, it must be configured as and set the same communication format as the PLC. In cases where the PLC is connected to the HMI and the PLC communication ports are not accessible, you can use this feature. The DirectLink function of the HMI Delta is used to communicate with the PLC and HMI, making it possible to upload / download and monitor both with a single cable.